Now any loom can rotate on an elevated base!
The Loom Holder Connectors convert the ‘Rotating’ Double Knit Loom base into a Universal Loom Holder.
How it works…
The loom holder consists of a leg connector, and a ‘tray’. Each holder connector snaps onto a leg of the rotating base. The ‘tray’ or, top part of the connector, holds the loom. The trays rotate around to adjust to each loom. This allows the holders to work with various loom sizes. The connectors are very strong and sturdy.
To begin set up, simply evaluate your loom size, and insert the 3 legs into the rotating base using either the outer, or the inner openings on base. If you are setting up a large round loom, the outer leg locations work best, and smaller looms use the inner leg locations.
Rotate the trays to best position to fit your particular loom. Now take your loom and set on top of the 3 trays. Turn and adjust the trays so that they are balanced with the rotating base. Once loom is placed comfortably on trays, simply wrap the fabric bands around loom and secure to bottom of tray. The bands will hook over one of the knobs, located on bottom of the tray. You can use your fingers or knit hook to attach bands.
If you are working with a larger loom with wider base, for example, the afghan loom, remove the small fabric bands and replace with the larger fabric bands that come in the kit.
The connectors work to hold many loom shapes and sizes.